Final diameter, height, weight, overflow and neck dimensions are compared against the buyer's specification.
120 cc HDPE packer bottles
120 cc HDPE packer bottles & 38-400 closures.
Source white HDPE packer bottles as a complete bottle-and-closure system. BottleMarkets coordinates dimensional comparison, 38-400 closure and liner review, physical samples, production pricing and shipment assumptions for supplement and solid-dose packaging programs.
Cap style, liner, torque and sealing performance are reviewed with the buyer's filling and induction equipment.
A close existing mold should be tested before any production order; a near-match is not treated as an exact replacement.
Bottle, cap, liner, packing, production and freight assumptions are separated in the quotation.
Before approving samples
120 mL packer bottle specification and sample checklist
Use this checklist to compare the bottle, cap and liner as one assembly. These are review requirements, not a claim that a sample has passed your production-line tests.
| Check | Required specification | How to verify |
|---|---|---|
| Nominal and overflow capacity | 120 cc / 120 mL nominal; overflow confirmed separately | Compare the drawing and measured usable fill; do not substitute brimful capacity for the nominal size. |
| Resin and color | White HDPE bottle | Confirm the resin specification, bottle weight and product-contact documentation required for the intended use. |
| Bottle geometry | Buyer-approved diameter, height and tolerances | Check the closest existing mold against the drawing, label area, conveyor guides and case packing. |
| Neck and closure | Matched 38-400 bottle and cap | Test thread engagement, cap torque and seal contact. A matching nominal neck finish alone is not approval. |
| Foil liner | Liner compatible with HDPE and the sealing process | Validate adhesion, removal and seal integrity using the intended induction equipment and settings. |
| Sample approval | Complete bottle, closure and liner assembly | Record results with the actual fill product before confirming the production specification. |
| Commercial scope | Bottle-only or complete sets, quantity and destination | Separate tooling, packing, freight and other agreed delivery charges from the unit price. |
Send your drawing and target quantity with the request. Sample quantity, availability, courier charges and dispatch timing are confirmed for each project.
Factory route
Separate visual similarity from an approved dimensional match.
Two 120 cc packer bottles can differ in overall height, diameter, gram weight, overflow, neck geometry and sealing behavior. The fastest reliable route compares the buyer's drawing or sample against an existing mold before production pricing is finalized.
Use an exact existing mold
Confirm drawing dimensions, neck finish, bottle weight and closure fit against a current production tool.
Approve a close existing format
Receive samples and validate filling, labeling, cap torque, liner seal and case packing before accepting a dimensional variation.
Tool the required specification
Develop a new mold when critical dimensions or line compatibility cannot be met by an existing bottle.
Application fit
Start with the package job, not only its appearance.
Dietary supplements
Capsule and tablet packaging programs using white HDPE packer bottles and lined closures.
Nutraceutical products
Rigid moisture-conscious packaging programs where closure and liner validation are part of line approval.
Contract packaging
Repeat filling programs that need stable bottle dimensions, case packing and equipment compatibility.
Second-source qualification
Programs comparing an established domestic or imported packer bottle with another production source.
Commercial and technical control
The bottle, cap, liner and production line form one approval system.
BottleMarkets can coordinate a factory comparison, but the buyer should approve physical samples with the intended product, cap torque, induction-sealing settings, label and packing process before commercial production.
Verify supplier rolesDrawing-to-mold comparison
38-400 closure review
Liner and sealing questions
Physical sample coordination
Bottle and complete-set pricing
FOB and delivered-cost planning
Buyer questions
What buyers ask before a factory quote.
Final specifications and commercial terms are always confirmed in writing for the individual project.
Is 120 cc the same volume as 120 mL?
One cubic centimeter equals one milliliter, but a 120 cc commercial packer description does not by itself confirm the bottle's measured overflow capacity or usable fill. The drawing or physical sample controls the comparison.
Can BottleMarkets quote a 38-400 cap and liner with the bottle?
Yes. The quote can separate bottle, cap and liner, while final liner suitability and sealing settings must be validated with the buyer's product and equipment.
Are 120 cc white HDPE packer bottles held in U.S. stock?
Not by default. Inventory, tool status, production quantity and shipment origin are confirmed for each project before a quotation is treated as current.
What should be checked on a sample before ordering?
Check critical dimensions, capacity, bottle weight, label fit, cap torque, liner seal, filling-line handling, product compatibility and case packing against the approved specification.
Start a packaging project
Tell us what you need. We will build the quote.
Choose a reference bottle or send your own photo or drawing. We will review product fit, minimum order, sample options and the information needed for a factory quote.
Prefer email?
Attach one bottle photo and include the approximate quantity. We will identify the missing details before asking the factory to quote.
Email a bottle photo